Heating Installation in Pasadena, TX
Most Pasadena heating replacements are in older houses, the 1960s and '70s ranches and the late-1940s bungalows. Ducts and venting in those houses decide more than the furnace does. We measure before we quote.
- Manual J free with replacement
- Furnace, heat pump, dual-fuel quotes
- 12-month parts & labor warranty
- 2,090+ Google reviews
Told your furnace is done?
A lot of Pasadena furnace shopping starts with a tech saying the heat exchanger is cracked. If the company that found it didn't show you photos or readings, get a free second opinion. Our Pasadena heating repair team will quote repair and replacement on one page.
The 1960s and '70s ranches
Strawberry Plaza, Park Manor and San Jacinto are full of ranch houses with attic air handlers and returns too small for the system. The original ductwork often runs in chases that don't meet current code. Put a new furnace on that and you've given the old problems a new serial number.
So the install starts with static pressure and the Manual J. We correct the returns that are starving the system and size the equipment to the airflow that results. An oversized furnace short-cycles and stresses its heat exchanger, and in a place where heat runs a few months a year, a right-sized one can last decades.
Bungalows near the refinery
The late-1940s houses are their own case. Brittle wiring and plaster walls leave little room for ducts. Mitsubishi mini-splits or a high-velocity system often fit where standard ducted gear won't.
What the price includes
Removal and disposal of the old equipment. Commissioning with measured airflow. On gas systems, a combustion test with gas pressure, draft and CO at the registers. A thermostat walkthrough before we go. Most like-for-like replacements finish in one day.
Installs lead with Trane, where we have been a Comfort Specialist since the 1990s, and Goodman on the value tier. The install is covered 12 months on parts and labor, and the manufacturer covers parts beyond that for a term that depends on the brand.
What does it cost in Pasadena?
See real replacement ranges in 60 seconds, based on real local installs. No phone number required to see the number.
Pasadena install questions
Another company said our heat exchanger is cracked. Do we have to replace the furnace?
Ask to see the evidence. If you did not get photos or readings, our free second opinion is for exactly that. If it is cracked, we price repair and replacement side by side.
Our Park Manor ranch has one small return. Will a new furnace be quieter and warmer?
Only if the return gets fixed too. A new furnace on a starved return runs hot and loud like the old one. We measure static pressure during the Manual J and put the duct correction on the same sheet as the equipment.
Can a 1940s bungalow near the refinery even take central heat?
Some can. Many have plaster walls, brittle original wiring and no real chases. For those we look at Mitsubishi mini-splits or a high-velocity system in place of forcing standard ducted equipment in.
Do we need a City of Pasadena permit?
Yes. A full-system replacement needs a mechanical permit, and disconnect or panel work needs a separate electrical permit. We pull both and schedule the inspection. Properties in unincorporated Harris County follow county rules, which we also handle.
What does a heating system cost here?
Heat pump systems start at $7,500 installed. A complete 3-ton system runs $8,900 to $21,500 by tier. The quote lists model numbers and efficiency ratings on each line.
More for Pasadena
The Pasadena service-area page covers the rest of what we do between the Strawberry corridor and the ship channel. The main heating installation page walks through the process. If this is really a whole-system decision, the Pasadena AC installation page covers the cooling side.