Pay Online Call Now Contact Us Book Online
cool-solutions-warm-people

Heat Pump Installation in Pearland and the South Houston Area

Get Service!

Interested in a heat pump for heating your home? The friendly, knowledgeable folks at Clear the Air Cooling & Heating are here to walk you through your options and handle your heat pump installation the right way. Let’s talk about how this all-in-one heating and cooling system can keep your home warm on chilly nights, comfortable year-round, and easier on your energy bills.

Install a Heat Pump for Modern, Energy-Efficient Heating

Do you have a friend, family member, or neighbor who can’t stop talking about their heat pump? There’s a good reason why. Heat pumps are some of the most efficient systems on the market, using electricity to move heat from the outdoor air into your home instead of creating it from scratch. That means warmer rooms, fewer temperature swings, and lower energy use compared to many traditional heating setups. 

Your home’s heating shouldn’t feel uneven, loud, or expensive to run, and with a heat pump, it doesn’t have to be. Clear the Air Cooling & Heating is a local HVAC contractor specializing in heat pump installation in Pearland, Texas, and throughout the Houston and Bay Area. We can quickly install a system and support all of your heat pump needs. Have questions or want a quote? No problem, just get in touch!

Benefits of Heat Pumps for Your Home Heating

A heat pump system heats and cools your home by moving available heat from the outdoor air through refrigerant lines. Even when it’s 40 degrees outside, there’s still enough heat energy in the cold air to warm your home. The heat pump system captures that heat and brings it inside, where the air handler distributes it evenly throughout your space.

There are real benefits to both heat pump heating and heat pump cooling, and we can share much more about this modern system with maximum efficiency. Here are some of the biggest heating advantages of heat pump heating systems:

High Heating Efficiency

Heat pump systems are designed to deliver far more heat than the electricity they consume. This performance is measured using HSPF (Heating Seasonal Performance Factor) or the newer HSPF2 rating. Most modern air source heat pumps installed today achieve HSPF2 ratings of 7.5–9+, meaning they can deliver 200–300% efficiency under typical winter conditions. 

You’re getting two to three units of heat for every unit of electricity used—something no combustion-based system can do.

When it comes to day-to-day heating performance, heat pumps feel very different from traditional natural gas furnaces. Gas furnaces tend to heat in strong bursts, which can be loud and often lead to rooms warming up quickly, then cooling off again. 

Heat pump heating is quieter and more gradual, helping maintain a more even temperature throughout the home. Many homeowners notice fewer hot-and-cold spots and a lot less noise.

Because heat pumps don’t rely on combustion, they produce fewer direct emissions than fuel-based heating systems. According to the U.S. Department of Energy, switching to a high-efficiency heat pump can reduce a home’s heating-related carbon footprint by 30% or more, depending on usage and efficiency level. 

For people who want a cleaner way to heat their home, this is a meaningful benefit. It’s energy savings you can feel good about.

In our area, a heat pump is more than capable of handling winter heating on its own. These systems are built for the kind of weather we get, so most folks stay comfortable without needing anything extra. Still, if your home already has a natural gas furnace, a dual-fuel setup can add an extra layer of comfort when temperatures get closer to freezing. 

The system automatically uses the heat pump most of the time and only calls on the furnace for extra heating power. You’re going to save money with or without the furnace, but this peace of mind is also a plus.

Heat pump systems aren’t one-size-fits-all. You can choose from single-stage compressors that run at full output, two-stage compressors that shift between high and low heating levels, or variable-speed compressors that adjust continuously to match demand.

We install both air source heat pumps and geothermal heat pumps. Geothermal systems use underground loops to draw on the Earth’s stable temperatures, allowing your heat pump unit to heat your home more efficiently year-round. If you’re curious about a geothermal installation, talk to us and we’ll see if your property is a good candidate.

How Much Do Heat Pumps Cost to Install?

Your heat pump installation cost depends a lot on what you’re starting with. A new build installation looks very different from replacing an existing air conditioner and furnace, and that affects both the scope of work and the price. Things like ductwork, electrical upgrades, system size, and efficiency level all play a role. 

What doesn’t change is our approach—we price the job fairly for the work involved and make sure everything is done right the first time. You’ll get a clear quote with everything included, plus a walk-through of financing options, promotions, manufacturer rebates, and tax incentives. If there’s a way to save money on your Pearland, TX, heat pump installation, we’ll help you find it.

Take Care of Your Heat Pump and It Will Take Care of You

A heat pump runs year-round, so small issues can add up if they’re ignored. That’s why manufacturers recommend maintenance twice a year—once before heating season and once before cooling season.

A standard visit takes about an hour. We inspect the indoor and outdoor units, clean coils and drains, check refrigerant levels, test electrical connections, and make sure the thermostat and controls are doing what they’re supposed to do. This kind of routine care helps prevent breakdowns, keeps efficiency where it should be, and reduces wear that shortens system life.

If you don’t want to keep track of all that, we offer the Clear Advantage Membership. It schedules those visits for you and lowers your out-of-pocket costs if something does go wrong.

Membership includes:

  • Two scheduled tune-ups each year—one for heating, one for cooling
  • A full Attic Efficiency & Safety Inspection to catch issues early
  • Priority scheduling, including weekends and holidays
  • Guaranteed 24-hour emergency response
  • 15% off repairs and reduced service fees
  • Extended repair warranties on covered work

What you pay into the membership isn’t lost. You can apply it toward a future system replacement, or use part of it for upgrades like ductwork or insulation. It’s real protection for your heat pump and peace of mind that comes from working with a team that only has your best interest in mind.

Already Have a Heat Pump Installed? We Can Replace It With a New Model

If your home already has a heat pump, you may be starting to question whether it’s still pulling its weight. A lot of homeowners are living with an old heat pump that was installed years ago or came with the house, and it may not perform like today’s systems. New heat pumps offer higher SEER ratings for cooling and stronger HSPF ratings for heating, which means they use less energy to keep your home comfortable. They also run quieter and handle humidity and cool winter nights better than older equipment. 

If you’re unsure whether a repair makes sense or it’s time for a heat pump replacement, we’ll take a close look and walk you through your options. We don’t upsell, we help you make the right call for your home and your budget.

Local Heat Pump Installers in Pearland and Other Communities

When you’re looking to install heat pumps, it’s easy to feel overwhelmed by options. A quick search for heat pump installation near me can pull up dozens of companies, but experience matters, especially with a system that needs to be installed correctly to perform the way it should. 

Clear the Air Cooling & Heating has expert NATE-certified technicians who are among the best in the HVAC industry. We speak with you clearly, answer your questions, and treat you with respect. 

We proudly serve Brazoria, Galveston, Harris, and Fort Bend counties—including Houston, Pearland, Friendswood, Clear Lake City, Alvin, League City, Galveston, Sugar Land, and nearby areas. When you work with us, you can expect:

Clear the Air provides complete heat pump services all in one place, from heat pump installation to heat pump repair and heat pump maintenance. We handle residential and commercial heating and cooling, and we also offer indoor air quality products that can give you cleaner, healthier air.

How to Get a Heat Pump Now

Feeling a little overwhelmed by the installation process? Don’t worry—here’s how Clear the Air makes getting a new heat pump much easier and far less stressful.

Call or Send a Message

Reach out by phone or book online to schedule a consultation. One of our technicians will visit your home, evaluate your layout, and talk through how you want to heat and cool your space. We’ll also handle proper heat pump sizing, so the system is matched to your home—not too big, not too small.

You’ll receive a clear, detailed quote that covers equipment, installation, and timing. Everything is laid out upfront, so you know exactly what’s included before any work begins. Once you’re comfortable with the plan, we’ll schedule your installation.

Most heat pump installations take a day or two. We’ll complete the work to code, protect your home while we’re there, and walk you through how the system operates before we leave. And if you ever need heat pump service down the road, we’re here to help.

Frequently Asked Questions

What HSPF do you recommend for a heat pump?

For most homes in this area, we typically recommend a heat pump with an HSPF2 rating of 8 or higher. HSPF measures how efficiently a system heats over an entire winter, not just on one cold day. Higher ratings mean the system uses less energy to deliver the same amount of warmth, which lines up well with the kind of winter weather we see here.

Getting the size right starts with a proper load calculation, not guesswork. We look at things like insulation, ceiling height, window placement, ductwork, and how your home holds heat. Skipping this step can lead to comfort issues and higher energy use. Correct sizing is one of the biggest factors in how well a heat pump performs long-term.

Heat pumps do run on electricity, but they’re built to use it efficiently. Instead of generating heat, they move it, which allows them to deliver more heating output than the energy they consume. In a winter climate like ours, most homeowners find their electric use stays reasonable while still keeping the house comfortable.

Yes, most modern heat pumps pair well with smart thermostats. The key is making sure the thermostat is compatible and set up correctly for heat pump operation. Smart thermostats can help fine-tune heating schedules and avoid unnecessary energy use without sacrificing your comfort.

With good installation and regular maintenance, most heat pumps last 15 years or more. Since they handle both heating and cooling, staying on top of tune-ups matters. Simple things like clean coils, proper refrigerant levels, and balanced airflow go a long way toward extending the life of the system.

Trust Your Heat Pump Installation to Our Experts

Upgrading to a heat pump is a key step in preparing your home for the future. We know you want your home to be as comfortable and efficient as possible, and a heat pump install from Clear the Air Cooling & Heating will help you get there.

We’ve been working in Pearland, Houston, Friendswood, Galveston, and nearby communities since 1990, and we’re known for excellent equipment and excellent service. Contact us for a quote on a new heat pump system today!