Energy Efficiency That Saves You Money
Switching to a heat pump can lower your monthly energy bills by 20–40% compared to older heating and cooling systems. The U.S. Department of Energy notes that today’s air source heat pumps can deliver up to three times more heating and cooling energy than the electricity they use.
For Houston-area homeowners, where cooling accounts for a big part of the monthly bill, that can mean hundreds of dollars in annual savings. Over the lifespan of a system, most homeowners see the investment in a heat pump pay itself back through lower operating costs and reduced energy bills.
Long Lifespan and a Smoother Operation
Air source heat pumps are built to handle the long, hot summers we get here in Southeast Texas. Instead of blasting on and off like older AC units, a heat pump runs more steadily. That means fewer temperature swings, less noise, and more consistent comfort in every room.
Because they don’t cycle as hard, heat pumps often last 15 years or more, compared to the typical 10–12 years you’ll get from a central AC. So you not only stay more comfortable, but your system can serve you longer, too.
Dual-Fuel Flexibility
Winters in Southeast Texas are mild compared to North or West Texas, but we still get stretches of cold weather where you need reliable heat. In many smaller or well-insulated homes, a heat pump can stand alone as the primary system. Still, a lot of homeowners prefer the peace of mind that comes with a dual-fuel setup.
With a dual fuel system, your heat pump takes care of heating and cooling almost all year, and your existing gas furnace automatically takes over when the temperature drops too low for the heat pump to run efficiently. The result is a system that keeps your home comfortable 95% of the year with the heat pump, while still putting your gas furnace to good use on those colder nights.
Options Beyond Air Source Systems
The most common choice is an air source heat pump, but it isn’t the only one. Geothermal heat pumps, also called ground source heat pumps, extract heat from the earth and can deliver even higher efficiency, while ductless mini split heat pumps are perfect for individual rooms or older homes without ductwork.
Each type has its own installation requirements and benefits, and we’ll walk you through the options (air source ducted systems, a geothermal system with ground loops, and wall-mounted ductless units) so you know which system will work best for your home and budget.
Reduced Carbon Footprint
Heat pumps are designed to use less energy, which means lower operating costs for you and fewer emissions going into the environment. By cutting back on wasted energy, they give you real energy savings on your monthly bills while also reducing your home’s carbon footprint. For many homeowners, that combination—cooling comfort, savings, and sustainability—makes heat pumps one of the smartest HVAC choices available today.
How Much Do Heat Pumps Cost?
We know this is probably the first thing you want to know, and we don’t blame you. Installing a new HVAC system is a big investment, and you deserve straight answers. The cost of a heat pump, though, isn’t one set number—it depends on your home and your needs. Things like the size of your house, the cooling capacity required, the type of system you choose, whether you already have ductwork in place, and the labor involved all affect pricing. Installation costs can vary widely, but rest assured that we’ll get you a personalized quote.
What we can also promise is clear, upfront pricing with no surprises. We’ll go over financing options, promotions, manufacturer rebates, and tax incentives that may be available to help make your new system more affordable. If there’s a way to save money on your Pearland heat pump installation, we’ll help you find it—and you’ll never have to worry about pushy sales tactics or hidden fees with Clear the Air.
Protect Your Heat Pump Now So You Don’t Pay for It Later
After you’ve invested in a new HVAC system, the last thing you want is for it to wear out early or surprise you with costly repairs. That’s why we (and every major manufacturer) recommend semi-annual heat pump maintenance to keep your unit running at its best.
A tune-up only takes about an hour, but it goes a long way. Our technicians clean the indoor and outdoor units, check refrigerant levels, tighten electrical connections, and recalibrate your thermostat. These steps keep your system efficient, reduce the chance of breakdowns, and give you confidence that your home is ready for the season.
To make it easier on you, we created the Clear Advantage Membership. It’s the easiest way to protect your heat pump, save money on service, and enjoy valuable extras year after year.
Here’s what you get as a member:
- Two tune-ups every year (one for heating, one for cooling)
- A full Attic Efficiency & Safety Inspection to catch problems early
- Priority scheduling, even on weekends and holidays
- 24-hour emergency response, guaranteed
- 15% off repairs and discounted service fees
- Extended repair warranties to protect your equipment
Every payment you make toward your membership isn’t lost—it’s credited back to you. Apply the full amount toward a complete system replacement, or use half of it toward upgrades like ductwork, insulation, or other big components. Protect your heat pump investment and enjoy peace of mind by enrolling with Clear the Air today.
Already Have a Heat Pump? We Can Replace It With a New Model
If your home already has a heat pump, you might be wondering if it’s time for a replacement. Many Pearland and Greater Houston homeowners either installed theirs years ago or bought a home with one already in place. The good news is that today’s heat pumps are much more advanced. They come with higher SEER ratings, which measure cooling efficiency, and HSPF ratings, which measure heating efficiency. The higher the numbers, the less energy your system uses to keep your home comfortable. That means lower utility bills and better performance.
Modern heat pumps are also quieter, more reliable, and better at handling humidity and those chilly nights when you still need dependable heat. If you’re not sure whether a repair will do the trick or if it’s time for a full heat pump replacement, we’ll give your system a complete inspection and let you know what makes sense. At Clear the Air, our recommendations are always based on what’s right for your home and your budget.
Trusted Heat Pump Installers in Pearland and Other Local Communities
When you search for heat pump installation near me in Pearland, you’ll see plenty of options. But finding the right HVAC contractor isn’t just about who pops up first—it’s about who shows up for you. You don’t want a company that takes days to return a call, rushes through your questions, or leaves you wondering what you actually paid for.
At Clear the Air, we treat you like a friend and a neighbor—because in many cases, we are! We’ve been serving Pearland and the surrounding communities for decades, and all of our certified technicians live right here in the communities that we care for.
We proudly serve Brazoria, Galveston, Harris, and Fort Bend counties—including Houston, Pearland, Friendswood, Clear Lake City, Alvin, League City, Galveston, Sugar Land, and more. With us, you’ll get:
- Licensed and Insured Technicians
- Second-Generation Family-Owned Business Since 1990
- Workmanship and Service Guarantees
- Same-Day Service
- Free Quotes
- Financing Options
- Upfront Pricing
- Excellent Reviews
Clear the Air offers complete heat pump services—heat pump installation, heat pump repair, and heat pump maintenance all in one place. We provide residential and commercial heating and cooling solutions, delivered by local experts who understand exactly what it takes to live comfortably here.
How to Get a Heat Pump Now
Not sure where to begin? Feeling a little overwhelmed by the process? Don’t worry—here’s how Clear the Air makes getting a new heat pump simple:
Call or Message Us Online
Give us a call or book online to set up a consultation. One of our technicians will come out, take a look at your home, and talk with you about how you want to cool and heat your space. Then we’ll lay out the best options for you to choose from.
Approve the Quote
We’ll give you a clear, detailed quote with everything included—equipment, installation, and schedule. No surprises. Once you’re comfortable with the plan, we’ll get you on the calendar.
Enjoy Your New Heat Pump
Most installations take just a day or two. We’ll handle everything to code, keep your home clean, and show you how your new system works before we leave. Plus, we’ll be here with ongoing heat pump services to keep it running its best for years to come.
Frequently Asked Questions
What are a heat pump’s SEER and HSPF, and what ratings do you recommend?
SEER (Seasonal Energy Efficiency Ratio) measures cooling efficiency, and HSPF (Heating Seasonal Performance Factor) measures heating efficiency. The higher the rating, the less energy your system needs to keep your home comfortable. Modern heat pumps often reach SEER2 ratings in the 15–20+ range and HSPF2 ratings of 8 or higher, which is what we recommend for most homes. These numbers mean lower energy bills and better performance compared to older equipment.
How do you determine the correct size of heat pump for my home?
Sizing a heat pump isn’t just about square footage. We also look at ceiling height, insulation, window placement, ductwork, and how much direct sun your home gets. Using this information, we calculate the cooling and heating capacity needed so your system isn’t oversized (which wastes energy) or undersized (which struggles to keep up). Getting this step right is key to long-term comfort and efficiency.
Are heat pumps noisy?
Not anymore. Older systems could be loud, but today’s heat pumps are built with quieter compressors and fan technology. Most outdoor units now run at sound levels comparable to a dishwasher or background conversation, so you can expect a big improvement if you’re upgrading from older equipment.
Do heat pumps work with smart thermostats?
Yes—heat pumps pair well with most smart thermostats. This allows you to control heating and cooling schedules from your phone, set up energy-saving modes, and even get usage reports to see how much energy you’re saving. When we install your system, we’ll make sure your thermostat is fully compatible and programmed for the best performance.
How well does a heat pump handle humidity?
Heat pumps are excellent at controlling humidity, especially during long cooling seasons. Because they run in steadier, longer cycles instead of constantly starting and stopping, they have more time to pull moisture out of the air. The result is a home that feels cooler and less sticky, even when the humidity outside is high. Many homeowners notice that rooms feel more comfortable at a higher thermostat setting, which can also lead to extra energy savings.
Clear the Air Makes It Easy to Save Money and Stay Comfortable
At Clear the Air Cooling & Heating, energy efficiency isn’t just a priority—it’s part of who we are. A new heat pump can shrink your bills and keep your home comfortable through every season.
Whether you’re just curious or ready to dive in with a heat pump installation in Pearland today, we’ll guide you the whole way. We’ve been serving Houston, Friendswood, Galveston, and nearby communities since 1990, and we know what it takes to get it right. With us, you get comfort that lasts, savings you can see, and a team you’ll actually enjoy working with. Contact us today!