Galveston, TX Heating & Air Conditioning

Winter HVAC Maintenance: To prepare a client’s HVAC system for wintertime, I conducted a complete tune-up, including filter replacement and lubrication of key components.

Furnace Ignition Transformer Replacement: A faulty ignition transformer in a furnace was replaced to ensure reliable startup and consistent heating for the client’s home.

Winter HVAC Installation: For a homeowner lacking ductwork, I recommended and installed a ductless mini-split system. This energy-efficient solution provided tailored climate control in multiple zones.

Air Duct Leak Repair: Addressing energy losses in a client’s home, I sealed air duct leaks, improving system efficiency and reducing utility costs.

Duct Redesign and Repair: After identifying airflow inefficiencies caused by poorly designed ductwork, I restructured the duct system. This optimization enhanced air distribution, providing the homeowner with even temperatures and improved comfort.

AC System Repairs: While servicing the client’s AC system, I observed that the system was suffering from reduced performance due to low refrigerant charge. I found and repaired a leak, then recharged the system to optimal levels to restore cooling efficiency.

Annual Air Conditioning System Maintenance: During an autumntime service call, I performed routine maintenance on the client's AC system, including cleaning the outdoor condenser unit, checking refrigerant levels, and testing system controls. These preventive steps ensure reliable operation and prepare the system for seasonal transitions.

Ductwork Cleaning and Repairs: Upon inspecting the client’s HVAC system, I found that blockages and leaks in the ductwork were causing poor airflow and energy inefficiency. I cleared the blockages and sealed the leaks, ensuring the system could deliver optimal airflow and performance.

HVAC Repair Service: I was called to a client's home to diagnose a tripped circuit breaker in their HVAC system. Upon inspection, I found that the underlying cause was a short circuit in the wiring. I repaired the wiring and replaced the tripped breaker, restoring full system operation.

AC Repair Service: Upon arriving at the client's residence, I found that a damaged contactor was causing the AC system to fail when starting or stopping. I replaced the faulty contactor, restoring reliable operation and ensuring the system could handle temperature demands effectively.

AC System Repairs: At the client’s residence, I discovered low refrigerant levels, which were negatively impacting the system’s cooling performance. I identified and repaired a refrigerant leak, then recharged the system to restore proper refrigerant levels and optimize performance.

HVAC Repair Service: At the client's residence, I discovered that a damaged evaporator coil was causing refrigerant leaks, which in turn reduced the system's cooling capacity. I replaced the evaporator coil and recharged the refrigerant, restoring optimal performance and preventing further refrigerant loss.

Indoor Air Quality Assessment: Conducted an indoor air quality assessment to measure the levels of pollutants and allergens in the home. This assessment helped the homeowner improve air quality before increased heating use during the autumn season.

Dehumidifier Installation: Installed a whole-house dehumidifier to control moisture levels during autumn, preventing mold growth and improving air quality as the home transitioned to increased heating use.

Autumn HVAC Tune-Up: Performed a detailed autumn tune-up, including cleaning the condenser unit, inspecting the blower motor, and testing system controls. This service optimized the HVAC system’s performance for the colder months ahead.

Heating System Repairs: Fixed a faulty electronic control board that had been causing the HVAC system to malfunction. The replacement restored proper functionality and ensured reliable heating performance for the colder season.

Central Air Conditioning Repairs: Replaced a malfunctioning evaporator coil that was causing refrigerant leaks and reducing cooling capacity. Once repaired, the system was fully recharged, ensuring optimal performance as the home transitioned to cooler autumn temperatures.

Air Conditioning Repair: Fixed compressor short cycling, ensuring proper cycling intervals and preventing damage.

Air Conditioning Repair: Replaced a damaged expansion valve, restoring refrigerant flow and cooling capacity.

Air Conditioning Repair: Repaired refrigerant leaks and restored cooling performance.

AC Repair Service: Replaced a malfunctioning blower motor, restoring airflow and comfort.

HVAC System Repair: Repaired a faulty evaporator fan motor to restore airflow and maintain cooling.

HVAC Repair: Cleared blocked condenser fins, improving heat transfer and cooling capacity.

AC UV-C Light Installation: Installed a UV-C light system for enhanced air purification and elimination of airborne contaminants.

AC Compressor Fan Blade Repair: Repaired a damaged fan blade to restore efficient cooling and airflow.