Sugar Land, TX Heating & Air Conditioning

Air Conditioning System Repair Service: Upon arrival at the client’s home, I discovered that the AC compressor clutch had failed, leading to a complete loss of cooling capacity. I replaced the worn-out clutch, ensuring proper compressor engagement and system operation.

HVAC System Repairs: I discovered that the evaporator fan motor in the client's HVAC system was malfunctioning, leading to weak airflow and reduced efficiency. I replaced the faulty motor, ensuring proper airflow and restoring efficient cooling.

Air Conditioning System Repairs: The client’s AC system was experiencing efficiency losses due to a malfunctioning expansion valve that was restricting refrigerant flow. I replaced the faulty valve, ensuring proper refrigerant circulation and restoring the system’s full cooling capacity.

HVAC System Repairs: The client was experiencing frequent system shutdowns. Upon inspection, I found that the high-pressure switch was malfunctioning, causing the system to shut down to prevent damage. I replaced the faulty high-pressure switch, allowing the system to operate continuously without unnecessary interruptions.

HVAC Repairs: Upon inspection of the client's HVAC system, I identified excessive vibration, which was potentially damaging components. I traced the issue to a misaligned blower wheel, corrected the alignment, and secured the unit, ensuring smooth operation and preventing future damage.

HVAC System Repair Service: While inspecting the client's HVAC system, I identified a faulty temperature sensor that was causing inaccurate temperature readings, which disrupted the heating and cooling cycles. I replaced the sensor to ensure accurate temperature control and system reliability.

Air Conditioning System Repairs: During my inspection of the client's AC system, I found that the refrigerant was contaminated, leading to reduced cooling efficiency and potential damage to the system. I purged the contaminated refrigerant, replaced it with clean refrigerant, and ensured proper system operation to prevent future damage.

HVAC Repairs: Repaired a faulty high-pressure switch that had been causing the system to shut down. The repair ensured smooth operation during pressure changes and prevented future breakdowns.

Cooling Repairs: Cleaned and lubricated the condenser fan motor, which was causing inefficiencies in cooling performance. This preventative maintenance helped the system operate smoothly as autumn temperatures fluctuated.

Ductwork Repairs: Sealed air leaks in the ductwork that were reducing airflow and causing energy loss. This repair improved system efficiency, ensuring optimal heating as the cooler autumn season arrived.

Humidifier Installation: Installed a whole-house humidifier to improve indoor comfort by maintaining optimal humidity levels throughout the drier autumn months. This installation enhanced the home's air quality as the heating system came into more frequent use.

AC System Repair: Repaired restricted refrigerant flow, optimizing cooling performance.

HVAC Maintenance: Conducted annual AC maintenance, including coil cleaning and refrigerant checks, ensuring efficient cooling.

Thermostat Repair: Replaced damaged thermostat wiring to restore communication and control functions.

HVAC Repair Service: Repaired a faulty air handler motor to restore airflow and maintain comfort levels.

AC Repair: Replaced a malfunctioning run capacitor, preventing motor failures and restoring proper operation.

AC System Repair: Repaired low refrigerant levels and recharged the system, restoring cooling efficiency.

AC Refrigerant Pressure Adjustment: Adjusted refrigerant pressure to optimize cooling efficiency.

AC Defrost Control Repair: Repaired the defrost control system to prevent frost buildup and ensure proper defrost cycles.

AC Ductwork Inspection: Inspected air ducts for leaks and blockages to ensure efficient airflow and cooling distribution.

AC Sensor Calibration: Calibrated temperature sensors for accurate room temperature readings and precise cooling control.

Air Cleaner Installation: Installed an electronic air cleaner to improve indoor air quality.

AC Repair: Replaced a faulty capacitor to restore system efficiency.

York Central AC Installation: Installed a York central AC system, known for its durability and high performance, ensuring consistent and comfortable cooling throughout the home.

Heating Repairs: Replaced a faulty gas valve to ensure reliable furnace heating.