Fresno, TX Heating & Air Conditioning

Heat Pump Sensor Calibration: Temperature fluctuations in a client’s home were traced to miscalibrated heat pump sensors. I carefully calibrated the sensors, restoring accurate temperature control and system efficiency.

AC Repair Service: Upon evaluating the client’s AC system, I found issues with inadequate lubrication in the motor, which was causing excessive friction and wear. I applied proper lubrication to the motor components, reducing friction and extending the life of the system.

Heating System Repairs: Replaced a worn-out blower belt that had been causing the system to struggle with airflow. After installing a new belt, the system operated efficiently, providing consistent warmth throughout the home.

HVAC Repairs: Replaced a malfunctioning blower motor that had caused airflow disruptions. The new motor restored proper airflow and improved overall system efficiency as the homeowner transitioned to heating in the cooler autumn months.

Ductwork Cleaning: Cleared blockages and sealed leaks, restoring airflow and optimizing performance.

Air Conditioning Repair: Replaced a faulty AC compressor clutch, ensuring proper compressor operation.

AC Blower Wheel Balancing: Balanced an imbalanced blower wheel to eliminate vibrations and maintain quiet operation.

Air Purification Installation: Installed a whole-house air purification system.

Air Conditioning System Repairs: During my inspection of the client's AC system, I identified refrigerant contamination, leading to reduced efficiency and potential damage. I purged and replaced the contaminated refrigerant to ensure proper system operation and prevent damage.

Multi-Zone Ductless Air Conditioner Installation: A customer required precise temperature control in various rooms. We installed a multi-zone ductless air conditioner, allowing independent climate control in each room. The system provides tailored comfort and energy savings for the homeowner.

Heating Repair Service: Arriving at a property with a malfunctioning heat pump exhibiting erratic behavior, I delved into a thorough inspection. The root cause was traced to a faulty reversing valve. I replaced the defective valve, ensuring seamless switching between heating and cooling modes, thereby restoring operational functionality. Post-confirmation of the system's proper function, I discussed maintenance plans with the homeowner for ongoing efficiency.

Ductwork Repair: To address airflow problems resulting from an inefficient ductwork layout, I redesigned the duct system. This optimization improved air distribution and overall comfort for the homeowner.

Furnace Repair: Conducting a check on a residential client's furnace, I meticulously inspected the heat exchanger to ensure its integrity. My thorough examination confirmed that the heat exchanger was free of cracks or damage, ensuring the safe and efficient operation of the heating system.

Helped home owner with duct cleaning options.

Helped home owner with heating and air conditioning preventative maintenance care. Thank you for choosing Clear the Air and our Clear Advantage Membership!

Helped home owner with clogged dryer vent

Helped home owner with indoor air quality solutions.

Helped home owner with indoor air quality solutions.

Helped home owner with air conditioning preventative maintenance care.

Helped home owner with air conditioning fan motor.

Helped home owner with air conditioning preventative maintenance care of an R-22 system.

Ac tune up, amped all major components, tighten all electrical, coil and leaked searched. Drains are cleared and treated

Ac tune up, amped all major components, tighten all electrical, coil and leaked searched. Drains are cleared and treated

Ac tune up, amped all major components, tighten all electrical, coil and leaked searched. Drains are cleared and treated

Ac tune up, amped all major components, tighten all electrical, coil and leaked searched. Drains are cleared and treated